Homelab

371 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 11 months ago

MODERATORS

[email protected]

SAS-Lanes and SAS-Expander quesitons (alien.top)

submitted 9 months ago by [email protected] to c/[email protected]

5 comments fedilink hide all child comments

Hey guys!

I own a HP Server with a p408i-a. I have connected it to a SAS expander.

8 Slots of the SAS Expander are filled with the front disks in the server. 2 Slots are connected to the RAID-Controller. So far so good, everyhing is working. I want to connect another SAS-Device to my expander - will it work?

The p408i-a has 8 SAS lanes. Do I need 1 lane per available/used slot on the expander? Or is it just total bandwidth? Somehow I couldn't find any information about that online. Any help? :)

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 9 months ago (1 children)

You can put a tape drive on the last port like you describe.

Nothing on the expander will suffer unless the full 96gbit link to raid card is saturated and it has to start throtteling stuff.

if you have something 4-8x cache SSDs with high load they would normally go in one cage and that cage gets its own controller.
To not risk saturating the link from expander and impacting performance + avoid the tiny latency expander adds.

[–] [email protected] 1 points 9 months ago

Thank you again. I only have 10k 2,5" HDDs, so I guess I won't be close to saturating it. That really helps!