Homelab

380 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

[email protected]

Mikrotik CRS317: Actual throughput in L3/managed mode? (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

7 comments fedilink hide all child comments

I have a CRS317 (idk the numbers, 16x sfp+ and one 1gbe rj45). I've had it running SwOS for years with my esxi hosts connected to it. My home network is a router on stick setup and it's been awesome for ~10 years.

But with all this pfsense plus fees and money garbage, I'm thinking about putting the microtik crs317 into routeros L3 mode so I can buy a netgate box like 1100/2100 (and get pfsense plus with the appliance).

Wondering what people's real-world experience is with routeros on the crs317 switch? I can currently saturate 10gbe and part of my battery backup and shutdown procedure is based on the timing of those transfers/migrations, etc. so while I don't need to absolutely keep every bit of 10GbE, I can't go down to something like 2.5GbE.

Thanks.

I guess if the mikrotik won't work: Should I buy a router? Should I buy a Cisco sx550x 10gbe switch? Thx.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 11 months ago

Why are you considering that?

Because the Netgate appliances I'd need to replace my whitebox appliance are either the 6100 or the 8200. So if I offload most of the routing into a L3 switch, and I can put dhcp somewhere else too, then all I need is a little 1100 or 2100 appliance to just do firewall.

My current setup has all my switches in L2 mode and all firewall/routing is done in pfsense. If I break out the routing portion (and dhcp) then I don't need nearly as much hardware for pfsense.