Homelab

371 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 11 months ago

MODERATORS

[email protected]

Can you easily bond two 2.5GbE ports? (alien.top)

submitted 9 months ago by [email protected] to c/[email protected]

12 comments fedilink hide all child comments

I just had fiber installed yesterday and got a 3Gbit plan.

The modem provided by the ISP has 1x 10GbE port and 4x gigabit ports.

I got a 10GbE NIC for my Synology NAS, which is installed right beside my modem.

However my PC is sitting at the opposite end of a 30m+ Cat5 run. The silver lining is there's a pair of them.

Can I bond them somehow to make them a single 5GbE port?I haven't bought a switch or router yet.

Considering the Mikrotik crs317-1g-16s+: https://www.ispsupplies.ca/MikroTik-RouterBOARD-CRS317-1G-16SRM

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 9 months ago (2 children)

yes and no.

you might be able to bond two connection but it is preferable to use LACP and that is normally not available on standard windows drivers / NICs.

on top of that you're internet speed won't go beyond 2.5G for a single session. lets say you download games from stream = you will be limited to 2.5G. But you might be able to download a game from steam at 2.5G/s and another one from EA at 2.5G.

also bear in mind that no HD will be able to save things at 3G/s and a SSD might be able to saturate it f you're lucky.

if you decided to get a 3G connection you must have been thinking about 10G all the way?

[–] [email protected] 1 points 9 months ago (1 children)

Honestly even 1GbE would have been a nice upgrade after being on 400/50 cable for more than a decade.

But the ISP was like you can have 3GbE for $10 more... and got seduced.

My soon to be 40 year old ass doesn't want a Mustang or a sports car, but I do want a fully functional Darth Vader costume and lightning speeeeeed Internet please.

I could serve 20x 4K remuxes to my Plex users and still not come close to saturate a 3Gbit link, that's just cray cray.

I think I will settle on a 2.5Gbe NIC in the PC for now and just run a Cat6 cable eventually. Some drywall will have to come off but its not a terrible job.

Is the Mikrotik crs317-1g-16s+ a good choice?

[–] [email protected] 1 points 9 months ago

Bro...you don't have to remove drywall. I don't understand why people get so insistent on removing drywall. Get a number of Pros in there and I bet none of them will say we have to tear all the drywall off. It's probably not your job don't limit their abilities on your own lack of knowledge and skills.

Mikrotik tends to have very good products

[–] [email protected] 1 points 9 months ago (1 children)

3G/s and a SSD might be able to saturate it f you're lucky.

The one is bits the other is bytes ;)

Network...3 gigabits, while a decent nvme gen 4 can do 4-5 gigabytes

Even old SATA connected SSDs should be able to keep up if you don't buy trash.

[–] [email protected] 1 points 9 months ago

Most ppl might even have spinning drives, they can do ~100 Mbyte/s..
Some have upgraded to SSD, that can do up to ~500 Mbyte/s.
And a few have upgraded to NVME, most are in the range of 1000-2500 Mbytes/s

All these numbers are for fresh new drives.

3 Gigabit = 375 MBytes/s. Yes I can do the math!