Homelab

380 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

[email protected]

Anyone else using a Xeon E5-2680 v4 (or similar?) - I have questions RE: power consumption (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

7 comments fedilink hide all child comments

Hi folks,

I currently have a HP ML10v2 with Xeon E3-1265L v3 in it (4c/8t) and 16GB DDR3 ECC. At work, we disposed of (and I now have in my wardrobe) a dual socket Xeon E5-2680 v4 (14c/28t each) and 64GB DDR4 ECC RAM.

Now this is obviously a massive jump in horsepower, and I very much doubt that I have any use case for a total of 28c/56t, so I was considering removing one of the Xeons and keeping it spare. I currently use a 1050TI for transcodes and that will be moved across.

It's all built on a ASUS Z10PE-D8 WS motherboard, so I'm just looking for anyone else using similar gear, and any tips you might have to reduce power consumption. I haven't yet gone diving through the BIOS to see what options are there, but I'm hedging between trying to screw down the power consumption, and just seeing if I can sell off the bigger machine and get a more modern Core i5 or similar...

As is, on the HP I'm running Unraid with a dozen docker containers, and that's about it. I would like to start playing with Ansible, so the bigger system would be good in that regard, but I'm not 100% sure if I want to keep this machine or not.

For reference, my power costs are AUD $0.8087/day supply charge, and AUD $0.2299/kwh. I'm renting so have no options for solar etc.

Thanks!

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 11 months ago (1 children)

Okay so currently my closest matching server would be my R730XD which is running dual E5-2650v4's which should have a similar power profile(the only diffrence with the 2680 is the number of cores however this shouldn't make much of a diffrence for low use workloads).

So currently with 2x SSD's, 2x2650v4's, 128GB RAM, 6x18TB HDD drives, 3x16TB HDD drives my power consumption sits around the 225-250W which over a month for me costs me about 50-75 euros a month in power(welcome to dutch power pricing...). However alot of this consumption comes from the drives, because before I put the HDD's in and just had the SSD's, the RAM and the CPU's it had an idle of around 80-100W. But this is in an enterprise server with some chonky drives so I assume those account for 5-15W as they have a base speed.

Generally I would say unless you specifically need functions that the board provides(alot of PCIE lanes for example) just get a consumer CPU and you'll be much better off as it will have better efficiency, performance and you'll be on a modern platform. And if you go for AM4 it will be really cheap cuz of the introduction of AM5.

[–] [email protected] 1 points 11 months ago

my setup is R730, with 2x E5-2697A v4, 16x 16GB ram, 8x WD 0F38459 , 2x Intel P4800X, 2x WD Red SA500, PERC H730P, Nvidia A5000, Dell R887V .... i think that most of the parts that add to consumption. Usage it is typically around 250-300W

Im planning to add 10x M.2 drives also, so this will probably add to the consumption also