Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

[email protected]

Smart lock (UK) that looks normal from outside (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

3 comments fedilink hide all child comments

Hi everyone, I'm new to home automation and I'm interested in getting a smart lock for the front door, as I want to replace the lock anyway (new house purchase, generally good practice to replace the lock). I'd rather the outside looked like a normal lock as I don't want it to look expensive and attract undue attention, so ai want something that just has a normal key lock on the other side.

This should also be functional, so we can get in and out with the key.

Any recommendations?

I've seen the switch bot lock, which looks doable, but is a) a bit ugly and b) if the key has to be permanently in on the inside, you wouldn't be able to put a key in from the outside.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 11 months ago

You can buy euro cylinders that allow a key to be in both sides at once.l and still lock / unlock.

I would say a Nuki would be my go to, no change to the external look of the lock. Can interface with a key on the inside of a thumb turn and if you want to change to a euro cylinder with a thumbturn inside so that it doesn't have a key installed inside permanently then that's 5 minute DIY job.