this post was submitted on 25 Nov 2023
1 points (100.0% liked)

Homelab

371 readers
9 users here now

Rules

founded 11 months ago
MODERATORS
 

I'm going to use it for both homelab and work (data engineering and AI fine-tuning).

Here are my concerns:

  1. Will this operate in a standard apartment? And can I use the hacks I've seen for Gen9 to quiet down the fans for office use? I might also replace the server fans for quieter ones (maybe).

  2. I'm gathering that when not under load the power draw is ~85w, which is doable but I'm also looking to get 8 SSDs and about a TB of ram ( to handle both homelabbing and fine-tuning workloads).

  3. Would a Gen9 be suitable for fine-tuning for now and best to hold out for a more dedicated server for this? Right now, it's costing about $750 to provision servers each project.

  4. And last, I'm having trouble finding parts for the server in case the refurbished/used one I buy doesn't have them. Some on eBay don't have the power cables, etc.

Overall, those of you have one in their home, what do you think of them?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 1 points 9 months ago (1 children)

I have a DL360 G10. Same server but 1U.

  1. The server is quiet as hell already. I have it in my basement though, but honestly I don't notice it next to my R720s.

  2. My power draw right now is 119W. I have 6 SSDs and 12 DIMMs, with 12 VMs currently on it.

  3. I use eBay exclusively tbh

[–] [email protected] 1 points 9 months ago

It will feel a lot louder if it's the only device in the same room as you.

For those unfamiliar, the dl360 is just a 1u version of the dl380.