Homelab

380 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

[email protected]

HP DL380 G10 - looking to buy, anyone have homelab experience with this model? (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

6 comments fedilink hide all child comments

I'm going to use it for both homelab and work (data engineering and AI fine-tuning).

Here are my concerns:

Will this operate in a standard apartment? And can I use the hacks I've seen for Gen9 to quiet down the fans for office use? I might also replace the server fans for quieter ones (maybe).
I'm gathering that when not under load the power draw is ~85w, which is doable but I'm also looking to get 8 SSDs and about a TB of ram ( to handle both homelabbing and fine-tuning workloads).
Would a Gen9 be suitable for fine-tuning for now and best to hold out for a more dedicated server for this? Right now, it's costing about $750 to provision servers each project.
And last, I'm having trouble finding parts for the server in case the refurbished/used one I buy doesn't have them. Some on eBay don't have the power cables, etc.

Overall, those of you have one in their home, what do you think of them?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 11 months ago

            
              A generation 10 will work fine in a standard apartment so long as the power supplies installed take the same voltage as your mains. I can't speak about the fan noise much, but there may be ILO hacks to control that. Make sure you're running compatible hardware as HPE systems tend to run much louder otherwise.
The power draw when idling greatly depends on the installed hardware. There is no definite answer until you can monitor its consumption from the wall.
A gen9 is suitable for quite a while yet, and the prices are going way down for that generation. A generation 10 would be the better buy if you don't plan to upgrade again for a while, but parts are going to be more expensive.
In terms of parts, Ebay is often one of the best places. Rather than looking up the machine generation/model, look up the part number which is on the component itself. It'll give you much better results not only on Ebay but Google as well.