Homelab

380 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

[email protected]

Cisco switch not working (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

5 comments fedilink hide all child comments

I have this Cisco SG300-28 Switch that I bought from an auction a year ago, was working well until it suddenly stopped working for no apparent reason few weeks ago. Removed all the network cables and brought it upstairs. When I plug the power cable with everything else disconnected, all the port lights blink twice and then the System LED starts blinking rapidly around 4 times per second roughly. If I plug in a network cable, there's no light/activity at the switch or pc end, and ipconfig command on my PC says media disconnected. Tried resetting the switch but holding down the reset button for even a full minute doesn't make any difference. I opened it and grossly everything looks fine. Need some help to get it working again. I have no prior experience with cisco or switches.

https://preview.redd.it/bezueyk8b42c1.jpg?width=1500&format=pjpg&auto=webp&s=5826469e6b3580c4b2941f9cf412fa9628cbc10c

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 11 months ago

Serial cable ordered, will be here in a couple days.