Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 11 months ago

MODERATORS

[email protected]

X10 photocell replacement (alien.top)

submitted 10 months ago by [email protected] to c/[email protected]

4 comments fedilink hide all child comments

I'm visiting my parents for thanksgiving and they need a fix for the exterior light at the front door. The desired behavior is on at dusk and off around midnight plus local control with a switch at the door. The catch is they want the switch for local control to be a traditional white toggle switch.

The light is actually wired to the basement, so right now this is implemented with a pair of old Insteon X10 toggle switches (the one in the basement actually controlling the light, the one at the front door signaling it) and a Leviton 6308 X10 photocell outside signaling on and off at dusk. The X10 photocell has gotten flaky (only sometimes turning the light on and rarely turning it off) and of course it's long since discontinued to just replace it.

The exterior lighting in the rear of the house is controlled through a professionally installed Lutron RadioRA2 system, so my immediate suggestion was they get the electrician back to tie the front light into that and put a button pad at the front door, but they want a toggle switch, not a button pad.

Does anyone have suggestions for solutions? The simplest thing would be a new X10 photocell or timer that could just take over control. My overkill solution is putting in something like a home assistant green to do the astronomical timing, sense a smart toggle switch at the door, and control any random smart switch for the actual switching in the basement. Although I don't know what that smart toggle switch would be.

Thanks!

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 10 months ago

I moved from X10 to Hubitat. I am not sure but I think Hubitat supports shelly directly. Might be an option. You could even replicate the photocell with one of the sensors that includes an ambient light level sensor. Many of the motion sensors have this feature.A couple of rules and you would have it.