this post was submitted on 24 Nov 2023
3 points (80.0% liked)

Homelab

380 readers
9 users here now

Rules

founded 1 year ago
MODERATORS
[email protected]
[email protected]
3
Looking for managed switch with POE, 10GbE and more than 10 ports (ideally 24) (alien.top)
submitted 11 months ago by [email protected] to c/[email protected]
19 comments fedilink hide all child comments
 

I don't know why this is such a hard combo to meet, but I can't seem to find anything that suits. I assume there's enterprise gear that would meet these points, but I'm not sure where to start.

POE is for running a half dozen POE cameras, 3x WIFI6 WAPs, Home Assistant Yellow. I could get away with running a separate POE switch if not for the WAPs (looking at the TP-Link AX11000's which are 10GbE). I could buy a UniFi XG 6 POE for just the WAPs and use another regular POE switch to give me enough ports, but that's just getting messy.

The ideal is to have a high density 10GbE managed switch that I can use for both my regular gear and POE gear (I have 20 ports to connect out to plus gear I might run in the rack). If the Unifi XG Enterprise had POE it would be perfect.

you are viewing a single comment's thread
view the rest of the comments
[โ€“] [email protected] 0 points 11 months ago (1 children)

Way too loud if you don't butcher it and do a fan mod. Those are datacenter switches. Got mine yesterday as a core for smaller lan parties. Great hardware, very solid and I love it. Especially for the price of around 200 bucks with two psus and one additional fan. But it never will run in my house for regular operation. The 6450s on the other hand ...

[โ€“] [email protected] 1 points 11 months ago (1 children)

Mine is pretty darn quiet ๐Ÿคทโ€โ™‚๏ธ

Actually it's quieter than my hp procurve and my Plex server.

You'll want to make sure the 6610 is flashed, configured and running both power supplies. Out of the box it runs at max speed without configuration and if it's missing a PSU it will max the PSU fan to keep the internals cool.

[โ€“] [email protected] 1 points 11 months ago (1 children)

Strange. Running it exactly like that. Any ressource for tweaking with the fan config?

[โ€“] [email protected] 1 points 11 months ago (1 children)

Run "dm fan"

Here's mine

  • FRU 1 Fan 1 Speed at 5793 RPM.
  • FRU 1 Fan 2 Speed at 6553 RPM.
  • FRU 2 Fan 1 Speed at 5844 RPM.
  • FRU 2 Fan 2 Speed at 6192 RPM

As well as "show chassis"

Here's mine as well

  • The stack unit 1 chassis info:

  • Power supply 1 (AC - PoE) present, status ok

  • Model Number: 23-0000142-02

  • Serial Number: 9FK

  • Firmware Ver: A

  • Power supply 1 Fan Air Flow Direction: Front to Back

  • Power supply 2 (AC - PoE) present, status ok

  • Model Number: 23-0000142-02

  • Serial Number: 91G

  • Firmware Ver: A

  • Power supply 2 Fan Air Flow Direction: Front to Back

  • Fan 1 ok, speed (auto): [[1]]<->2

  • Fan 2 ok, speed (auto): [[1]]<->2

  • Fan controlled temperature: 61.5 deg-C

  • Fan speed switching temperature thresholds:

  • Speed 1: NM<----->76 deg-C

  • Speed 2: 71<-----> 80 deg-C (shutdown)

  • Fan 1 Air Flow Direction: Front to Back

  • Fan 2 Air Flow Direction: Front to Back

  • MAC 1 Temperature Readings:

  • Current temperature : 49.0 deg-C

  • MAC 2 Temperature Readings:

  • Current temperature : 56.5 deg-C

  • CPU Temperature Readings:

  • Current temperature : 61.5 deg-C

  • sensor A Temperature Readings:

  • Current temperature : 50.5 deg-C

  • sensor B Temperature Readings:

  • Current temperature : 53.5 deg-C

  • sensor C Temperature Readings:

  • Current temperature : 39.5 deg-C

  • stacking card Temperature Readings:

  • Current temperature : 53.5 deg-C

  • Warning level.......: 77.0 deg-C

  • Shutdown level......: 80.0 deg-C

[โ€“] [email protected] 1 points 11 months ago

Amazing, thank you. But how do I set values for it?