this post was submitted on 23 Nov 2023
1 points (100.0% liked)

Home Automation

79 readers
2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

founded 11 months ago
MODERATORS
 

Can you use a dimmer 2 relay with a dimmer switch?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 1 points 10 months ago (1 children)
[–] [email protected] 1 points 10 months ago (1 children)

Probably this:

https://www.bgelectrical.uk/uk/wiring-devices/grid/range/20a-20ax-3-position-modules

Google makes it surprisingly hard to search for basic hardware in other countries.

[–] [email protected] 1 points 10 months ago (1 children)

Right so what's the key terminology that I need to know when talking to the electrician.

Retractive dimmer switch?

[–] [email protected] 1 points 10 months ago (1 children)

Seems in over the pond speak “Retractive centre off”. The idea being a hot feeds then switch. Then, depending if you press up or press down one of two momentary outputs provide power to the SW1 and SW2 ports on the Dimmer2.

Here’s another example/brand

https://www.sparksdirect.co.uk/1-gang-6ax-2-way-retractive-and-centre-off-switch-grid-module-in-painted-white-schneider-gug202ocwpw

[–] [email protected] 1 points 10 months ago (1 children)
[–] [email protected] 1 points 10 months ago (2 children)

First link I believe is it.

None of the second link. Those are all actual dimmers.

[–] [email protected] 1 points 10 months ago

Yes and actually the first review of the the first link states it was used with a shelly dimmer 2. Thanks for your help!

[–] [email protected] 1 points 10 months ago (1 children)

Last question. Assuming I got the switch above is there any way to press the switch to turn on and off as well as hold in to dim/brighten. Sorry if my question is not clear.

[–] [email protected] 1 points 10 months ago (1 children)

I’m pretty sure any short press toggles on or off. Long press does a fade up/down.

[–] [email protected] 1 points 10 months ago (1 children)

Yeah so looking at the user guide for dimmer 2

https://kb.shelly.cloud/__attachments/63897613/User%20&%20Application%20Guide?inst-v=dd456c15-eb79-423d-82f6-ed9064a7cc66

I'm guessing I set the relay as an edge switch so any press of the switch will turn it on or off. I see there is "fade rate" which as you stated indicates controls the dimming when the button is held. However what I don't see is the ability to set it so if you hold the button an "up" position it brightens or if its held in a "down" position it dims.

Unfortunately if I cant replicate that behavior with the switch I wont pass the "wife acceptance test" which means no smart lights.

[–] [email protected] 1 points 10 months ago (1 children)

No, set it to Dual Button Mode. If you manage to wire it backward then to check “swap inputs”.

[–] [email protected] 1 points 10 months ago

Ok so would dual button mode allow holding the button in one direction brighten and holding it the other dim?