Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 11 months ago

MODERATORS

[email protected]

Custom electronics for home automation (youtu.be)

submitted 10 months ago by [email protected] to c/[email protected]

4 comments fedilink hide all child comments

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 10 months ago

I love everything except the mic board with the speaker(from an installation/servicing standpoint). That worries me a little bit. I’m thinking you could print some sort of hinged track so you can mount the POE board that needs to be buried. That drops in first and swings down(maybe even a 45 degree if you have the depth, so removal is smoother). Then attached to the next track would be the speaker, magnet down, with a deflector or printed waveguide to route acoustics toward the opening? Then snap in the mic board the way you have it now. That way the whole thing can be recovered easily for servicing without cutting up the wall since you’re gonna mud it all in. Its always more difficult to install/service in the field than it seems on a test bench! But I love it all. Make some videos when you get things up and running. It is very exciting!