Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 11 months ago

MODERATORS

[email protected]

Automate my hot water heater (alien.top)

submitted 10 months ago by [email protected] to c/[email protected]

21 comments fedilink hide all child comments

I am typically the first one in my house to take a shower and I like hot showers. I have noticed that if I take a shower first, the hot water is not that hot and doesn't last very long. But if others take showers before me and the hot water has to recharge then the hot water is HOT and lasts a long time.

I have a 50 gallon hot water tank.

The only two things I have (besides sinks and showers) that use hot water are a dumb dishwasher and a dumb washing machine.

What I was thinking was to set up an automation in HA to somehow trigger something to use hot water for like 10 minutes in order to get the hot water heater to recharge.

Any ideas?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 10 months ago

I would bet that the thermostat in your water heater is faulty, and has a hysteresis value that is too strong.

The heater is supposed to switch on when the water temperature goes below a certain value, and switch back off when the temperature goes above a certain value. Those temperatures should be close enough, so the temperature is almost constant; but not too close, so the heater does not switch on and off constantly.

In your heater, those two values are way too far apart. When the heater is idle, it allows the water to get warm. When someone takes a shower, the temperature decreases, then it finally switches the heater on. And it does not switch the heater off until the water is hot.