Homelab

371 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 11 months ago

MODERATORS

[email protected]

NVENC on PCIe 2.0 x1? (alien.top)

submitted 10 months ago by [email protected] to c/[email protected]

1 comments fedilink hide all child comments

I recently upgraded my proxmox host and went with a Ryzen 5700G for GPU accelerated media enconding. Turns out my media server does recognize the iGPU but doesn't use it not matter the video format.

While CPU encoding works just fine with the performance at hand, I'd still prefer hardware acceleration and I am thinking about getting a PCIe x1 to x16 riser (or just removing the blocking part of an x1 slot...) to install my old Quadro P600 for NVENC, which worked fine in the previous hosts x16 slot when I didn't have a high bandwidth network card.

The board (MSI B450M PRO-VDH PLUS) has 1x PCIe 3.0 x16 used by an Intel X520-DA2 and 2x PCIe 2.0 x1 currently not in use.

My question is if the limited bandwidth of PCIe 2.0 x1 will influence the NVENC capabilities in a significant manner and if you have recommendations for trustworthy adapters which won't start a fire, preferrably available to buy in germany.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 10 months ago

Will work without any problem, I have P400 in ITX mobo on PCIe 2.0 X1 and do transcoding 4k HDR without any problems :) Connected to mobo via simple PCIe X1 extender (around 10 cm) with open back so can take any pci-e from X1 to x16. No need for active riser.