Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 11 months ago

MODERATORS

[email protected]

Linear Z-Wave (Accessory) Switches and Vivint (WT00Z) (alien.top)

submitted 10 months ago by [email protected] to c/[email protected]

5 comments fedilink hide all child comments

Hi Everyone,

I am completely stumped and coming to THE HIVE MIND for help. I have a bunch of Linear Z-wave switches that I've been installing around my house. For the most part it's going fine, but two of the switches are accessory switches - WT00Z - and I can't seem to get them to pair with my Vivint panel. I've tried excluding them and the panel is just not recognizing their existence.

My suspicion is that these were paired up as slave switches in a past life (I did buy them second hand), and they need reset in some way to be pair-able with my Vivint System (and subsequently re-slaved in my set up - I have a minimote to do that, if I can get to that step)

Totally understand I'm working with some older technology here, but does anyone know how to hard reset these at the hardware, without having to use a controller? Because the Vivint panel just isn't doing the job.

I do have the switches wired up correctly and have power to the WT00Z - The light is on green solid.

TIA.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 10 months ago

The WT00Z is a basic Z-Wave scene control button that should work with any Z-Wave controller. Though I do not have experience with Vinit.

The WT00Z can only be reset by Z-Wave Exclude. It would be my guess that the WT00Z is not properly Excluded.

Put any Z-Wave controller in Exclude mode and tap the WT00Z. I don't remember for sure, but a double tap may be necessary for the Include/Exclude on this device.

After successfully excluding the WT00Z, you will need to perform an Include with your Vinit controller.