Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

[email protected]

Z wave or smarthings compatible garage opener (alien.top)

submitted 1 year ago by [email protected] to c/[email protected]

6 comments fedilink hide all child comments

Hello Looking for options to control garage via smartthings. Had myq for a while but it’s not working with smartthings not with the workarounds I had in place.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 1 year ago (1 children)

If your garage has a button attached to it just add a Zen17 relay to the setup to make it smart.

For example 2 wires run from the garage door opener to a switch on the wall. Disconnect the 2 wires going to the wall switch and connect them to C and NO. Then take a new set of wires and connect them to S1 and C on the inputs of the Zen17. You will the be able to control it from the wall and from your Z-Wave hub.

[–] [email protected] 1 points 1 year ago

Because OP stated they used myq I am going to assume that the GDO is new enough to have security 2.0+ and will require something like a garadget contact adapter to work using the method you described. Works flawlessly once you have the extra required contact adapter though!