this post was submitted on 14 Nov 2023
2 points (75.0% liked)
Homelab
380 readers
9 users here now
Rules
- Be Civil.
- Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
- No memes or potato images.
- We love detailed homelab builds, especially network diagrams!
- Report any posts that you feel should be brought to our attention.
- Please no shitposting or blogspam.
- No Referral Linking.
- Keep piracy discussion off of this community
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Mind sharing some details on that ryzen server? It sounds cool
It's a simple machine - Ryzen 3 2200G, 48GB of DDR4-3200 running at 2933MHz, B550 mATX motherboard (most power-efficient AM4 chipset + has built-in 2.5GbE and PCIe 3.0 for all chipset lanes), with a mix of NVMe and SATA SSDs along with a few 4TB HDDs that are currently always off.
I went with the 2200G because I already had it, but you could easily get much better performance using a 5600G or 5300G, or a 4600G if you can find one.
Handles all my tasks no problem (PhotoPrism, Jellyfin, and general file server duties for the most part). I've got a big fat tower cooler on the CPU and I can't hear it even under full load.
It used to be a 3900X machine when I had much higher compute requirements but I swapped out the CPU when idle power became a bigger concern.
What was the idle power consumption on the 3900X machine?
Around 50-60W, but that's including a 1080Ti.
I have a 10drive unraid system with a 3900x -- pulls total 300-350w Rack with switches and networking stuff pulls another 200ish
Total 500ish :)