Homelab

380 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

[email protected]

Dell PowerEdge r620 wont boot new OS (alien.top)

submitted 1 year ago by [email protected] to c/[email protected]

10 comments fedilink hide all child comments

I was given 4 servers from my company recently. All dell poweredge servers. I am trying to set up my r620...

Firstly I did not want to use RAID at all so I flashed the RAID controller. I flashed it using this guide: https://fohdeesha.com/docs/perc.html and it went fine.

Something I noticed though is that, raid has to be enabled in the BIOS still, even tho we flashed the controller to allow IT mode. If I disable RAID from the BIOS, my live installer doesn't see any of my HDD's. So I left it enabled, but I don't have any RAID configs setup (cleared them from the menu from pressing ctrl+R during boot)

So I try to install my OS (booting from usb) and i remove all the drives from the bays except one.

The OS seems to install perfectly fine. I get zero issues. The imagine below is what happens when I try to boot after installing the OS. I have tried VOID Linux and Debian. Both do the same thing. I am booting in UEFI mode. Please help, any support is appreciated.

I tried 3 different hard drives....

https://preview.redd.it/x0eck6ll910c1.jpg?width=3024&format=pjpg&auto=webp&s=1c66d0088b942b14408269445a1d5bdb0d108641

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 1 year ago (1 children)

I think you will have to set up the disks in the RAID even if they are set them up as RAID 0.

I set up my r610 over the weekend and I have one SSD and 5 HDD I set up the 5 in a RAID and forgot to set up the SSD for the OS, when installing the OS i could see the HDD but not the SSD. I had to reboot and initialize that SSD as a disk in RAID 0 and I was back in business. I flashed the PERC when I started but the drives were still not active till RAID was set

[–] [email protected] 1 points 11 months ago

Your flash did not work correctly if you are still able to see anything related to RAID options when interacting with the card. Flashing it into HBA mode takes all of that away and requires a bootloader to be installed in order for a connected drive to be bootable.