Homelab

371 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 11 months ago

MODERATORS

[email protected]

M.2 Ethernet cards and ribbon cables (alien.top)

submitted 10 months ago by [email protected] to c/[email protected]

7 comments fedilink hide all child comments

https://preview.redd.it/e16b8zhx4szb1.png?width=536&format=png&auto=webp&s=350586f1ae0aac8b1c2b290f8dc6bfec06bae423

I want to add an additional 2.5GbE network interface to an old HP EliteDesk Mini device. The ubiquitous pictured device, which uses a Realtek 8125B processor, is available from any number of sources on Ebay, AliExpress, Amazon, etc., but given the layout of the HP, the end of the card is very close to the case, and therefore the ribbon cable as shown will simply not fit. I haven't found any of these for sale with a connector that faces towards the pins, raather than away, or is even vertical, which would likely fit. My knowledge about ribbon cable construction is pretty much nonexistent, and so far Google has been no help, but is it feasible to change one of these cables, or is anyone aware of one of these M.2 adapters sold with a cable with the form factor I need? Thanks!

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 10 months ago

I've done this. You can get another ribbon cable for between the card and mb connector, and relocate it anywhere in the case you want.