this post was submitted on 23 Sep 2023
16 points (100.0% liked)
Bicycles
3032 readers
1 users here now
Welcome to [email protected]
A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!
Community Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia.
-
Be respectful. Everyone should feel welcome here.
-
No porn.
-
No ads / spamming.
-
Ride bikes
Other cycling-related communities
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
The drivetrain wears together, so when I replace one piece I go ahead and replace everything. Since you're doing the chain and freewheel, you may consider replacing the chainrings as well. If the chain is less worn than the freewheel, it may skip: vice-versa.
You can use a wide freewheel, but it's not necessary. An advantage of a wide freewheel is that it would be quieter. Same for the chainring. Before buying a chainring, count the number of bolts and measure the BCD. Wide parts are usually advertised as Wide, but could also be advertised as Single speed or BMX.
Once you have all of your parts, cut the chain to the correct length and install them. Use the tensioner to eat up the length of the link left over after cutting the chain.
It may or may not be obvious that this will require specialized tools. Good luck!