this post was submitted on 03 Aug 2023
24 points (96.2% liked)
guitars
3819 readers
1 users here now
Welcome to /c/guitars! Let's show off our new guitar pics, ask questions about playing, theory, luthier-ship, and more!
Please bring all positive vibes to the community and leave the toxic stuff elsewhere.
Rules:
-
Treat others with respect. ALL others.
-
No spam
-
No self promotion
-
No NSFW
-
No circle jerk posts, there are other places for that silliness, and they are wonderful. Not here.
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I don't have a feeling the pickups pull on them that much harder than the previous set, and it wouldn't pull it harder than what the bridge allows. Also this new one is already a bit lower. String i'm testing it with now is actually the one that was on it before, but it could indeed be that the new set has a slightly higher gauge. I started using the old string just to not damage the new one too much but putting it on, adjust stuff, taking it off etc etc etc
The truss rod is a very good recommendation, have heard of that but didn't think about adjusting that myself, but from what google shows it could be a cool solution. Thanks for the tip!
Good luck, update your post if you figure it out
Definitly, will prolly try some stuff this weekend, will update!
Sorry if I'm late to the party... Once a guitar is set up properly, the only adjustment you should really ever have to make is the truss rod unless you make a major change ir some sort of event (fell over, etc). OP says they (possibly) changed to a heavier gage string, if your action was already set low, this could be the culprit as some truss rods are more stout than others. Over time this will cause the "bow and arrow" effect, but in the short term the gage of the strings might be enough to cause buzzing. Some other possibilities-
If it's a bolt-on neck, is the neck plate screwed in tight?
If it's a Fender with that horrid "tilt" option, maybe back that adjustment screw out AFTER loosening the neck plate, then tighten the neck plate back down
Is the guitar now in a more humid environment? This could cause swelling of the wood, possibly pushing some frets slightly out of their seat and may need to be pressed and glued in.
Does the guitar have a trem? Then the heavier gage strings might ultimately be the issue as the stronger pull as it's tuned to pitch would pull it lower. If it does and you look at the trem, it should sit at the same level/angle as the body. If it's tilted forward toward the headstock, there's your issue.
I'm by no means an expert, but I've set up all of my guitars and probably another 12-15 for friends and have had no complaints. If you really want to be pointed in the right direction for guitar setups on YouTube, look for DWOFS (Dave's World Of Fun Stuff). If he hasn't set up your exact model he's definitely done one similar enough where you should be able to figure out what's going on.
As always, take everything you read on the internet with a grain of salt, a lot of helpful posters in this thread but we're all trying to triage sight unseen.