this post was submitted on 04 Dec 2024
12 points (92.9% liked)

homeassistant

12247 readers
83 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
[email protected]
12
Questions about Zigbee, Wifi and Smart-Plug measurement accuracy (feddit.org)
submitted 2 weeks ago by [email protected] to c/[email protected]
12 comments fedilink hide all child comments
 

I want to dip my toes into the smart home world and decided that I want to use homeassistant and primarily use devices based on zigbee, as I do not want to overload my wifi with a bunch of devices.

Smart plugs seem to be most interesting to me as I would like to have accurate power measurements for my homelab and applicances. The keyword is accurate here. There seems to be some science showing that the accuracy of smart plugs can vary a lot. I have read that devices that are flashed with the tasmota firmware can actually be calibrated. Unfortunately this firmware is only available for wifi devices.

So my questions are:

  • Are there zigbee smartplugs that are known to be very accurate or can be calibrated to be very accurated?
  • Is preferring zigbee over wifi actually a good Idea? I mean both use 2.4 GHz, which is known to be crowded. When will wifi smart home devices become a problem?
  • Is a calibrated tasmota smart plug more accurated than a typical zigbee plug?
  • Is this inaccuracy reported in the paper even relevant for non-scientific use?
you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 1 points 2 weeks ago

My Z-wave switches and smart plugs are reasonably accurate for a common house use, but I wouldn't say that they are 'very accurate'. I haven't done any measurements, but if in example I plug in an appliance which has 200W on label I get roughly that number from the system. But obviously I don't have any way to tell if the smart plug shows wrong value or if the label on the device is incorrect. And with things like LED bulbs the current varies anyways with temperature plus I don't know if the things take actual line voltage into account which varies a bit as well.

For my use case they're accurate enough, but if you need 'electroncis lab accurate' results I doubt that any of the smart plugs can provide that.