Ask Electronics

3315 readers

25 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago

MODERATORS

[email protected]

What's the best way to add a battery like device to a dynamo light (lemmy.world)

submitted 1 month ago by [email protected] to c/[email protected]

15 comments fedilink hide all child comments

Hello everyone, I bought a bottle dynamo for my bicycle with a rear and front light. Though I have one little tweak that I would like to add and that's a way to keep it light up for about 1 minute (at least 30 sec) without pedaling. I thought of putting a capacitor in the circuit to store some energy but I would like what do you all think of it ?

Thank you for your time and have a nice day you all !

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 1 month ago* (last edited 1 month ago) (1 children)

What I wanted to do was something like that IMG_20240925_092655

Though you seem to have a better knowledge and better circuit. I bought 2 super cap 5.5v so I wanted to put them in series (though get half the capacitance). Your approach seems to be better and I may take it. Though mine should be working ? Keep in mind that I'm a nooby in electronics and I keep learning from the internet so not the best to have solid base...

Does your solution works with 5.5V, the 6V dynamo does not blow it ?

Thank you for your answer I really like it.

[–] [email protected] 1 points 1 month ago (1 children)

Your solution may very well also work, good thinking. A few things to consider though:

Putting capacitors in series requires balancing them
A silicon full bridge rectifier drops ~1.4V frm the input
Incandecent bulbs require a lot of current to get going, this may result in a delay for them to turn on

[–] [email protected] 1 points 1 month ago

Ok, I forgot the voltage drop =\ I got LED light so should be fine. What I should do is put your circuit to the test without the capacitor and check if the voltage is low enough for the capacitor to handle ? How should I balance the capacitors ? (Even if I will not take this path, I would like to know)

Thanks again for your help