techsupport

Long story short I was messing around in the terminal and messed up my Linux Mint Installation and now when I boot into Linux I only get a CLI and don't even see the Linux mint logo. I tried to restore to a previous state using Timeshift but it did not work so I ended up taking a live usb and backing up all my important documents to an external drive. I want to just do a fresh installation but unfortunally for me the boot drive is also the same drive I use to boot into Windows (which I am still able to boot into from GRUB). Is there a way I can reinstall the OS without affecting my ability to boot into Windows?

The laptop I'll be recording them with is running Windows 11 Pro.

Not loving the 'Camera' app that comes stock with Windows.

Tried recording just with my cellphone, but ran into issues with audio quality and battery life. I have an old webcam, and just ordered a tiny bluetooth microphone that I'm hoping to either plant near or literally pin onto the prof if they're cool with it.

Not looking for anything fancy... ability to choose both video and audio device, record/pause, and save so that I can upload to YouTube and forward it to the class. (side question... best video format for this?).

Not really familiar with this kind of software... I recall one of my gaming buddies being a fan of OBS Studio, but unsure if that's just on-screen capture for gaming/streaming or if it can do webcam-only too - DL'ing right now to experiment. In the mean time, taking all suggestions!

Thanks, all!

Edit -

Took about 5 mins to get all the shit on my wishlist figured out in OBS (https://obsproject.com/), and if my dumb ass can figure it out that quick, that is some GOOD software!! Kinda wish I'd have tried first before asking, but was not expecting it to be that easy. I'll leave the thread up just incase its helpful for someone else later.

I'm looking to sell my laptop. I've used stuff like DBAN before but that nukes the whole drive obviously. Is there any good way to leave the OS intact after a reset but also make sure that there's no recoverable data?

Any ideas are appreciated. Thanks!

Edit to add: I don't have the product key for the pre installed Windows 10 OS. Maybe there's a way to recover that and reinstall after a full wipe?

Follow-up to this thread - this is way more specific, so hopefully worthy of its own thread. I think wildcards are the best option for my skill level (basically none), and have gotten a good chunk of what I wanted to accomplish done with those.

An issue I've run into and can't seem to google my way out is making TTS pronounce acronyms in a sensible way. For example "PACU" (post-anesthesia care unit) is usually vocalized as "pack-you" but my TTS software likes to say things like "pace-uh". Or "PO" (latin abbreviation for 'by mouth') is vocalized by just saying the letters, but TTS says "Poe". Stuff like that.

When the TTS comes across a capitol letter with a space on either side, it just pronounces the letter, so I'd still lose things like "pack-you" but at least hearing it spell out "pee ay see you" would make sense, vs "pace-uh" which is gibberish and confusing at high playback speeds.

Best I've come up with so far is <([A-Z]{2})> on the Find side, but that's only spotting the two character terms like PO, and ignoring the longer ones... I'd hoped it would see PACU and detect PA, AC, and CU as three distinct sets of two that could cobbled into "P A C U".

Nothing I've done on the Replace side comes close to working. It either does nothing at all, or it'll do something like turn "PO" into <([A- Z]{2})>. Not sure if preserving the original characters is something A-Z is actually capable of - seems not, but I'm kind of an idiot with stuff like this, so any tips would be appreciated!

Thank you!

Nursing student here!

So we get a shit load of reading assignments, and since everything's digital nowadays, I've been leaning a lot on text-to-speech software that effectively converts reading assignments to listening assignments.

The problem is textbooks have a LOT of just... noise. Every image has something like "FIGURE 13.5 SURGICAL DISASTERS!" "FIGURE 13.6 YOU GOT SUMMONED TO COURT!" etc. In-text citations are EVERYWHERE, copyright info is EVERYWHERE... reading the content, you just skip over all that crap, but pasting it into a TTS service, all that trash gets spoken aloud and adds up to a huge time sink every chapter, and distracts from the actual lesson.

Googling it, the best I've been able to come up with is doing a find and replace in MS word for things like FIGURE **.*^13 with wildcards on and the replace field blank... but it's not very consistent - sometimes it works, sometimes not. Same with nuking parenthesis and the text within with \(*\)

All that said, I'm wondering if I'm approaching this wrong by using MS word in the first place. Would be absolutely amazing if I could save all the commands on standby, then run them at the same time. By end of the school program, we're talking like 100 chapters from multiple books, so anything that lets me just nuke huge batches of BS as quickly as possible and dive right into the listening would be a godsend.

Thanks all!!

Hello there,

First of all; I am sorry if I am using the wrong community - and sorry for any n00bshow regarding this post since I have not done this before.

Background: To my utter delight, I found a podcast on archive.org that I have been searching for. I have succesfully downloaded all audio files listed under "VBR MP3 FILES" as a .zip file (and as a torrent), and they will download as .mp3-files. I am on Windows 10 (sorry, I will change) and using Firefox as browser.

Very long story short, a lot of files had parse errors in an ID3 editor (Mp3tag), and I incidently found out that most of the files actually seem to be .m4a-files instead of .mp3.

Nonetheless, all URLs on the podcast's main page show as .mp3-files and will download so if downloaded as a .zip or through torrent. (Or if using Edge, apparantly, which I just tested).

Issue: What is REALLY weird (at least to me) is that if I am right clicking a single link to an episode in Firefox > save link as > my dialog box shows it will save as .m4a-file - which seems to be the correct file type (with no parse errors in Mp3tag) which I naturally would prefer. Screenshot attached.

If been trying to search for an answer my self what is happening, but evidently failed to do so. Does anyone have an answer? And for a bonus; is it possible to batch "save link as"? wget on a Linux machine? downthemall on FF likewise download files as .mp3.

To hopefully reproduce:

1. Downloading first episode "2015.11.01 - #1 – 1. Mosebog, kap. 1, vers 1..mp3" for instance as torrent
2. Download the same episode by manually browsing the episodes with Firefox > click "VBR MP3" under "download options" > right click “2015.11.01 - #1 – 1. Mosebog, kap. 1, vers 1…mp3” > save link as... > it will hopefully download as .m4a.

THANK you very much in advance! Have a good one.

The confirmation page says the order is confirmed but instead of providing tracking information, it has a button that says 'Download Shop to track package'. Obviously I'm not going to do that, but I do want to track my package.

I thought I could at least click the link to see if somewhere in the chain of steps that would normally follow if one were going to download the app, I might glean the tracking number so I can track the package, but unfortunately, the shop app that I refuse to get on principal because of the shady tactics used to coerce people in to downloading it is even worse than I expected because it can't even scam people competently. The download button is supposed to generate some kind of QR code for you phone. I hoped this QR code might actually have embedded the tracking number in it, in which case I could just grab it that way, but it looks as though the QR code is failing to generate, instead I'm seeing what looks like a heavily zoomed in screencapture of a website with home search trolley and account icons and a sentence partially covered up by a swirly arrow logo. I thought it might have been my browser, but it's the same even on Chrome.

I now can't even use the shop app even if I wanted to, because whether I allow it to be installed on my phone or not, there will be no means I can think of where the tracking number can be transmitted to it so, and because the online store hasn't provided a real tracking number I can't do things the normal way either. Anyone know how to get around this? Or at least force the QR code to actually generate so maybe I can extract something useful from it?

Hello everyone,

my neighbor got an old Samsung Tablet with Android 4.1.X, he primarily wants to use it for watching YouTube. Now, the problem is, the YouTube-App needs to be upgraded, but the Play Store says the device is not compatible. I have tried to just load YouTube in the browser, but the page just doesn't seem to load. Any ideas on how to get that running? Thanks in advance!

Has anybody gotten this to work? If I set up multiple MFA devices with my IAM accounts, they all work flawlessly. But if I set up multiple MFA devices with my root account, only the original MFA device works. No matter how carefully I set up and synch a secondary device, it simply will not work with root. As the linked article says, this should be possible with either root or IAM (though in the past this was not the case). Thanks.

I’m open to both online services as well as self hosting. But I’d like it to be low-maintenance.

Ok so I was trying to clone 512gb nvme ssd to my new 2tb drive with clonezilla and it keeps taking me to automatic repair. I unplugged the original drive and replaced it with the new one before booting. I ran a chkdsk both times before cloning.

The first time I cloned the drive i used these settings:

device to device beginer disk to local disk Chose my source and target Skip disk checking -k0 use source partition table

Then I tried these settings:

device to device expert disk to local disk Chose my source and target Left everything as default -k1 Create partition table proportionally

I also plan on partitioning half of the drive so that I can dual boot linux as Window 10 is reaching eol and I don't want anything to do with Windows 11 and I still need Windows for gaming.

Is there is a error from my side or is it down for everyone?

Hello all, I'm trying to flash linux mint to a old thinkpad I'm refurbishing. However, when I go to flash the ISO to the USB, balena etcher throws the following error's

[23381:0729/101159.717484:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 1 times! [23340:0729/101202.577845:ERROR:browser_main_loop.cc(280)] GLib-GObject: invalid cast from 'GtkFileChooserNative' to 'GtkWidget' [23340:0729/101205.337371:ERROR:browser_main_loop.cc(280)] GLib-GObject: ../gobject/gsignal.c:2777: instance '0x37b801188b20' has no handler with id '5761' [23381:0729/101205.693383:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 2 times!

I would like to note I'm flashing this ISO from my main computer running fedora, and I installed balena etcher from an RPM, (Already tried the app image, but it seems that FUSE is acting up).

Thank you in advance!

I have EndeavourOS installed on my X200S. When I power it on it gets past "Welcome to EndeavourOS" but gets stuck around

Starting Bluetooth service...

Or

Starting Network Manager...

I believe it got stuck on a few other spots previously but I can't recall where. The "Drive in use" indicator light stops flashing at this point. At that point the only option as far as I can tell is to press the power button.

I can boot from a USB drive without any issues.

I had updated my computer but I believe I was believe I did a successful reboot after that.

Any suggestions? I can't seem to find a solution online. A lot of the support pages end with them giving up and reinstalling EndeavourOS.

---

Solution:

My X200S runs Libreboot and apparently that has issues with the current Linux kernel. I created a bootable EndeavourOS USB unlocked the LUKS drive with sudo cryptsetup luksOpen /dev/sda1/unlockedFolder. Mounted it with sudo mount /dev/mapper/unlockedFolder /mnt. Ran arch-chroot /mnt so I could gain access to the OS. Switched to the LTS kernel using sudo pacman -S linux-lts and edited the grub files to add the -lts.

I originally tried just downgrading the kernel but it caused my WiFi not to work.

The whole issue was quite strange because it would freeze at random parts and even successfully boot at times.

I primarily use external drives (USB flash drives) and cloud storage (PCloud) for active file management and storage but unfortunately the default file delete action is a permanent delete and not a send-to-recycle bin and I have scoured the internet looking for a way to change the delete settings but they only tell you how to permanently delete files. So to prevent future disaster, is there a way to make sure I don't delete things from at least my flash drive, since I believe PCloud has a backup feature.

I was cloning my moms 237gb ssd to her new 1tb ssd on her windows 11 S computer using clonezilla and after booting into the 1tb drive it is showing up as 237gb. So I took out my live usb with gparted only to find out the partition used to store the data was indeed taking up 1tb. Is the a reason why it is not showing up as 1tb. Here are the options I choose to clone the drive if that helps. I also have some screenshots as well.

Screenshots

File Explorer

Windows Disk Management

GParted

Clonezilla Steps I took

1. device to device

2. Expert mode

3. disk to local disk

4. Chose my soure and target drive

5. Left everything at default

6. skiped disk checking

7. -k1 Create partition table proportionally

My laptop charges with USB C, so when the standard charger broke, I just used the USB out port from an EcoFlow battery. The display on the battery said the laptop pulled 25-30 watts while charging. So, why can't I use just any USB brick that can output more than 30 watts?

Is there something that is bound to go wrong that I don't know about?

Are laptop chargers really that special?

(Edited for clarity)

I use wired earbuds. Last week, I started noticing issues with my current pair on my android phone. The first issue was that the audio would disconnect if the headphones cord going into the jack was slightly moved. The issue seemed to progress, whereby audio disconnects happened more commonly. Eventually, the headphone issue started changing tracks in Tidal (the headphones do not have a next track button) all by itself and launching the google music app and playing songs in it.

I assumed my earbuds were at fault, but the same earbuds perform fine in my laptop and other earbuds experience the same issue in my phone.

Restarting the phone temporarily removes this issue, but it seems to start up again the longer the phone is on.

Has anyone else experience this? Does anyone know what's going on and how I can fix this? Did an update get pushed to my phone that's intended to brick earbuds?

Edit: Thanks to everyone for their helpful suggestions and comments ☺️!

Hi everyone,

I’m experiencing some frustrating issues with my ASUS Vivobook 15 Pro K3500PC and I'm wondering if anyone else has come across similar problems.

A few days ago, my laptop was working fine, but after a 30-minute trip home, it wouldn’t turn on. I tried charging it, but the LED indicator didn’t light up. After some research, I found a suggestion to hold the power button for about 40 seconds to turn it on. Surprisingly, it worked!

However, when I tried to adjust the brightness, the indicator showed it was increasing, but the screen brightness remained the same. I seemed to stay at the lowest level. At least it was working, but a few hours later, I went to get some coffee, and when I came back, it was off again with no charging indicator.

To add to the frustration, my warranty expired a few months ago. I took it to the repair shop I usually go to, and they informed me that there’s an issue with the motherboard.

Has anyone else experienced these power and brightness issues with their ASUS Vivobook 15 Pro K3500PC? Any suggestions or advice would be greatly appreciated!

Thanks!

Hi,

Can anyone give some recommendations for an external storage for Nvidia Shield Pro (USB 3.0)?

Requirements:

• Reliability (so it won't die on me in a few years or won't start having issues with the data on it)

• Fast (it's for the purpose of storing and playing videos, including 4K)

• Size 8-10TB

• Price up to ~ $255 (unless it's extremely worth it to go a little above that)

Thanks in advance.

Hello! I am interested in creating my own cloud storage network, but I have to idea how to even start it. It's just for myself, mainly pictures and videos. Ideally what I would like to do is be able to manually and/or automatically upload pictures and videos from my phone to my home cloud storage. I have Xfinity as my service provider. What is the cheapest and simplest way to achieve this?

Hi all! I recently built a cold storage server with three 1TB drives configured in RAID5 with LVM2. This is my first time working with LVM, so I'm a little bit overwhelmed by all its different commands. I have some questions:

1. How do I verify that none of the drives are failing? This is easy in case of a catastrophic drive failure (running lvchange -ay <volume group> will yell at you that it can't find a drive), but what about subtler cases?
2. Do I ever need to manually resync logical volumes? Will LVM ever "ask" me to resync logical volumes in cases other than drive failure?
3. Is there any periodic maintenance that I should do on the array, like running some sort of health check?
4. Does my setup prevent me from data rot? What happens if a random bit flips on one of the hard drives? Will LVM be able to detect and correct it? Do I need to scan manually for data rot?
5. LVM keeps yelling at me that it can't find dmeventd. From what I understand, dmeventd doesn't do anything by itself, it's just a framework for different plugins. This is a cold storage server, meaning that I will only boot it up every once in a while, so I would rather perform all maintenance manually instead of delegating it to a daemon. Is it okay to not install dmeventd?
6. Do I need to monitor SMART status manually, or does LVM do that automatically? If I have to do it manually, is there a command/script that will just tell me "yep, all good" or "nope, a drive is failing" as opposed to the somewhat overwhelming output of smartctl -a?
7. Do I need to run SMART self-tests periodically? How often? Long test or short test? Offline or online?
8. The boot drive is an SSD separate from the raid array. Does LVM keep any configuration on the boot drive that I should back up?

Just to be extra clear: I'm not using mdadm. /proc/mdstat lists no active devices. I'm using the built-in raid5 feature in lvm2. I'm running the latest version of Alpine Linux, if that makes a difference.

Anyway, any help is greatly appreciated!

---

How I created the array:

pvcreate /dev/sda /dev/sdb /dev/sdc
vgcreate myvg /dev/sda /dev/sdb /dev/sdc

pvresize  /dev/sda
pvresize  /dev/sdb
pvresize  /dev/sdc

lvcreate --type raid5 -L 50G -n vol1 myvg
lvcreate --type raid5 -L 300G -n vol2 myvg
lvcreate --type raid5 -l +100%FREE -n vol3 myvg

For education purposes, I also simulated a catastrophic drive failure by zeroing out one of the drives. My procedure to repair the array was as follows, which seemed to work correctly:

pvcreate /dev/sda
vgextend myvg /dev/sda
vgreduce --remove --force myvg
lvconvert --repair myvg/vol1
lvconvert --repair myvg/vol2
lvconvert --repair myvg/vol3

Just got a high refresh rate monitor (PG248QP) and it makes this high pitched noise when I set it to 500hz. Anyone else have this problem with this or other high refresh rate monitors?

I have my phone set to remember my car, my wife's car, and a pair of bluetooth headphones. When it's within range of one of them, it connects and all is well.... until it detects another one, then it changes to that.

On the way home from work yesterday, I passed my wife on the interstate. Didn't notice her car, but did notice my music suddenly stop... oh well; not gonna futz with bluetooth when I'm driving... guess it'll just be quiet for the rest of the trip.

Couple minutes later, it comes back. Yay!

Make it home, and as I'm getting out of the car, the wife pulls up, so I wait for her and we're chatting our way back to the apartment. She mentions her car randomly started playing heavy metal on the way home for a minute, then stopped. Now the gears are turning - I ask if it was around the area when mine went silent, and yup! I was a couple lanes over, but my phone detected her car and ditched mine to connect to it.

I've noticed it auto-hop from my car to my headphones or vice versa before, but car to car is a new one.

It's really annoying... and seems like the kind of thing that should be a check box in the settings, but I got nothing.

Phone is a Google Pixel 8 if that helps.

I'd really like it to connect when it comes in range of a recognized device ONLY if it's not already connected to another device...

Am I just stupid? This seems super basic...

(Event log details at the end) Trying to run OculusSetup.exe from the Meta website seems to be impossible on my home PC, as the installer hard crashes before any UI is even shown.

As expected, Meta support is completely and utterly fucking worthless. All they know how to do is email you the basic instructions already on their worthless ass website.

I am running Windows 10 x64 Home, and can be bothered to provide further tech specs if someone provides a specific reason for needing them. I also have Avast AV installed, but completely uninstalling and rebooting made absolutely no difference in outcome or error output.

No, I am not open to reinstalling Windows.

Running the installer results in 3 administrative error events :

1. .NET Runtime

spoiler

Log Name: Application Source: .NET Runtime Date: 7/2/2024 2:26:29 AM Event ID: 1026 Task Category: None Level: Error Keywords: Classic User: N/A Computer: ---- Description: Application: OculusSetup.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.ArithmeticException

Exception Info: System.OverflowException at System.Windows.Media.Imaging.ColorConvertedBitmap.FinalizeCreation() at System.Windows.Media.Imaging.ColorConvertedBitmap..ctor(System.Windows.Media.Imaging.BitmapSource, System.Windows.Media.ColorContext, System.Windows.Media.ColorContext, System.Windows.Media.PixelFormat) at System.Windows.Media.Imaging.BitmapImage.FinalizeCreation() at System.Windows.Media.Imaging.BitmapImage.EndInit() at System.Windows.Media.Imaging.BitmapImage..ctor(System.Uri, System.Net.Cache.RequestCachePolicy) at Daybreak.Gooey.SleekImage..ctor(System.Uri) at Dawn.Gooey.DawnWindow.OnLoaded(System.Object, System.Windows.RoutedEventArgs) at System.Windows.RoutedEventHandlerInfo.InvokeHandler(System.Object, System.Windows.RoutedEventArgs) at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean) at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs) at System.Windows.UIElement.RaiseEvent(System.Windows.RoutedEventArgs) at System.Windows.BroadcastEventHelper.BroadcastEvent(System.Windows.DependencyObject, System.Windows.RoutedEvent) at System.Windows.BroadcastEventHelper.BroadcastLoadedEvent(System.Object) at MS.Internal.LoadedOrUnloadedOperation.DoWork() at System.Windows.Media.MediaContext.FireLoadedPendingCallbacks() at System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks() at System.Windows.Media.MediaContext.RenderMessageHandlerCore(System.Object) at System.Windows.Media.MediaContext.RenderMessageHandler(System.Object) at System.Windows.Media.MediaContext.Resize(System.Windows.Media.ICompositionTarget) at System.Windows.Interop.HwndTarget.OnResize() at System.Windows.Interop.HwndTarget.HandleMessage(MS.Internal.Interop.WindowMessage, IntPtr, IntPtr) at System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)

Event Xml: 1026 0 2 0 0 0x80000000000000 79576 Application ---- Application: OculusSetup.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.ArithmeticException

Exception Info: System.OverflowException at System.Windows.Media.Imaging.ColorConvertedBitmap.FinalizeCreation() at System.Windows.Media.Imaging.ColorConvertedBitmap..ctor(System.Windows.Media.Imaging.BitmapSource, System.Windows.Media.ColorContext, System.Windows.Media.ColorContext, System.Windows.Media.PixelFormat) at System.Windows.Media.Imaging.BitmapImage.FinalizeCreation() at System.Windows.Media.Imaging.BitmapImage.EndInit() at System.Windows.Media.Imaging.BitmapImage..ctor(System.Uri, System.Net.Cache.RequestCachePolicy) at Daybreak.Gooey.SleekImage..ctor(System.Uri) at Dawn.Gooey.DawnWindow.OnLoaded(System.Object, System.Windows.RoutedEventArgs) at System.Windows.RoutedEventHandlerInfo.InvokeHandler(System.Object, System.Windows.RoutedEventArgs) at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean) at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs) at System.Windows.UIElement.RaiseEvent(System.Windows.RoutedEventArgs) at System.Windows.BroadcastEventHelper.BroadcastEvent(System.Windows.DependencyObject, System.Windows.RoutedEvent) at System.Windows.BroadcastEventHelper.BroadcastLoadedEvent(System.Object) at MS.Internal.LoadedOrUnloadedOperation.DoWork() at System.Windows.Media.MediaContext.FireLoadedPendingCallbacks() at System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks() at System.Windows.Media.MediaContext.RenderMessageHandlerCore(System.Object) at System.Windows.Media.MediaContext.RenderMessageHandler(System.Object) at System.Windows.Media.MediaContext.Resize(System.Windows.Media.ICompositionTarget) at System.Windows.Interop.HwndTarget.OnResize() at System.Windows.Interop.HwndTarget.HandleMessage(MS.Internal.Interop.WindowMessage, IntPtr, IntPtr) at System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)

2. Application Error 1

spoiler spoiler Log Name: Application Source: Application Error Date: 7/2/2024 2:26:29 AM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ---- Description: Faulting application name: OculusSetup.exe, version: 1.97.0.0, time stamp: 0x6632b1c5 Faulting module name: KERNELBASE.dll, version: 10.0.19041.4597, time stamp: 0xe77e2ab7 Exception code: 0xe0434352 Fault offset: 0x00140b92 Faulting process id: 0x2e28 Faulting application start time: 0x01dacc597bd3d92d Faulting application path: C:\Users---\AppData\Local\Temp\OculusSetup-4a1e1d83-cbde-43f4-b781-b2517c0be2a3\OculusSetup.exe Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll Report Id: 2d236814-9329-4595-a463-331f921c2a4c Faulting package full name: Faulting package-relative application ID: Event Xml: 1000 0 2 100 0 0x80000000000000 79577 Application ---- OculusSetup.exe 1.97.0.0 6632b1c5 KERNELBASE.dll 10.0.19041.4597 e77e2ab7 e0434352 00140b92 2e28 01dacc597bd3d92d C:\Users---\AppData\Local\Temp\OculusSetup-4a1e1d83-cbde-43f4-b781-b2517c0be2a3\OculusSetup.exe C:\WINDOWS\System32\KERNELBASE.dll 2d236814-9329-4595-a463-331f921c2a4c :::

3. Application Error 2

spoiler

Log Name: Application Source: Application Error Date: 7/2/2024 2:26:33 AM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ---- Description: Faulting application name: OculusSetup.exe, version: 1.97.0.0, time stamp: 0x6632b1c5 Faulting module name: KERNELBASE.dll, version: 10.0.19041.4597, time stamp: 0xe77e2ab7 Exception code: 0xc000041d Fault offset: 0x00140b92 Faulting process id: 0x2e28 Faulting application start time: 0x01dacc597bd3d92d Faulting application path: C:\Users---\AppData\Local\Temp\OculusSetup-4a1e1d83-cbde-43f4-b781-b2517c0be2a3\OculusSetup.exe Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll Report Id: e9a29fe3-f6d3-4e50-afa8-56100a08f8e7 Faulting package full name: Faulting package-relative application ID: Event Xml: 1000 0 2 100 0 0x80000000000000 79580 Application ---- OculusSetup.exe 1.97.0.0 6632b1c5 KERNELBASE.dll 10.0.19041.4597 e77e2ab7 c000041d 00140b92 2e28 01dacc597bd3d92d C:\Users---\AppData\Local\Temp\OculusSetup-4a1e1d83-cbde-43f4-b781-b2517c0be2a3\OculusSetup.exe C:\WINDOWS\System32\KERNELBASE.dll e9a29fe3-f6d3-4e50-afa8-56100a08f8e7

.

PS, if the only thing you can think of is "HURR JUST WIPE YOUR DRIVE AND DO A CLEAN OS INSTALL", fuck yourself with a pitchfork or I'll fucking find you and do it myself. That's reddit shit and you know it

UPDATE I'm seeing a lot of references to KERNELBASE.dll, as well as some kind of image drawing/color issue that I don't understand. If anyone has any ideas about those, I'd appreciate it

UPDATE 2 Found a log from the Oculus app its self in my appdata. Main take away so far is this line:

"System.OverflowException: The image data generated an overflow during processing. ---> System.ArithmeticException: Overflow or underflow in the arithmetic operation".

I remember looking up an exception code earlier and something came up about trying to divide by zero. Anyone have a clue here? It almost sounds to me like the Meta people just can't fucking code to save their lives (or careers, which I'm not to confident in right now).