Data Hoarder

WD has the "WD Dashboard" utility that will allow you to run a LONG SMART test.

Any drive made this side of year 2000 will check itself when reading, so all you need is to fill it with junk data and open it, then delete.

ZFS scrubs. I sleep well at night and haven’t lost a byte of valuable data in 15+ years.

None. Modern drives reallocate bad sectors so the only important metric I look at is remaining spare sectors.

The manufactures software. In your case

https://support-en.wd.com/app/products/downloads/softwaredownloads

WD Drive Utilities

Western Digital Dashboard

It is expected that some sectors fail over time. The HD is provision with extra space to account for this. The SMART threshold is what you should look at.

Do a long SMART test. It goes over the whole drive. The short ones only do spot checks.

HD Sentinel

If out of other options just do a simply zero format (e.g. diskutil zeroDisk diskX on macOS), and a long SMART test afterwards (e.g. smartctl -t long diskX). That's what I do with my new disks and it served me well so far. For large capacity disks it is like a heavy 2 day process (1 day formatting, 1 day testing), but it gives me a piece of mind afterwards.

Extra Hint: During any SMART long test make sure to disable disk sleep in your OS for the time, else test will abort (e.g. caffeinate -m on macOS). Also avoid crappy external enclosures that put the disks to sleep by themselves (or you may want to run a script that regularly reads a block from the disk to keep it awake.)

Here's my macOS script to handle the job (I needed it recently because a temporary crappy USB enclosure). It reads a block every 2 minutes via raw I/O w/o caching involved ("/dev/rdisk")

#!/bin/bash
# $Id: keepdiskawake 64 2023-10-29 01:55:56Z tokai $

if [ "$#" -ne 1 ]; then
	echo "keepdiskawake: required argument required (disk identifier, volume name, or volume path)." 1>&2
	exit 1
fi

MY_DISKID=`diskutil info "${1}" | awk '/Device Identifier:/ {print $3}'`

if [[ ! -z "${MY_DISKID-}" ]]; then
	printf '\033[35mPoking disk \033[1m"%s"\033[22m with identifier \033[1m"%s"\033[22m…\033[0m\n' "${MY_DISKNAME}" "${MY_DISKID}"
	MY_RDISKID="/dev/r${MY_DISKID}"
	echo "CTRL-C to quit"
	while true; do
		echo -n .
		dd if="${MY_RDISKID}" of="/dev/null" count=1 2>/dev/null
		sleep 120
	done
else
	echo "keepdiskawake: Couldn't determine disk identifier for \"${1}\"." 1>&2
	exit 1
fi

you need to do a full read and write on the disk. use a program to write the disk full of 0s and then verify read. UNRAId does this with its preclear function.