Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 11 months ago

MODERATORS

[email protected]

I am building a new house and I am trying to prewire as much as possible. If price was not an object what would you pre-wire? (alien.top)

submitted 9 months ago by [email protected] to c/[email protected]

140 comments fedilink hide all child comments

I am building a new house and I am trying to prewire as much as possible. If price was not an object what would you pre-wire?

Currently, I have my house being set up for Lutron RA2 lights

Putting 18/2 for speakers in each rooms

One cat5e by each room for a tablet/intercom

Cat5e for cameras

22/2 for Door/window contacts by all exterior doors and windows

smurftube by every room (where the intercom is for future growth).

18/2 by windows where I may want power shades.

What else am I missing?

Thank you

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 9 months ago (1 children)

My list:

cat 6 to every room, preferably 2 per box, 4 per room
conduit, I like the idea of a corner box and conduit to the attic
wire contacts for every window and door for alarm. ( Do each contact homerun so they are sperate and can run as separate zones)
speaker wire from either a wall patch or back to a central location.
empty conduits to your.uility pads outside to a closet or garage for connectivity. I pulled fiber to minor for a bit of.lightening isolation.
decide on wap locations and camera before build
my favorite out outlets outside and in the soffits for Christmas/ holiday lights on their own GFCI breaker and run them to a switch in the garage. On ra 2 I have holiday mode that I turn on and bang Christmas lights are timed.

Couple suggestions

Skip the cat5e and use 6 min not enough price saving
For your windows just wire assuming motorized shades
Consider wiring for or installing a house wide generator during your build, I retrod mine and it wasn't horrible but if your going to do it anyhow nail it while it's open.
Don't be afraid of dedicated power circuits. My panel is huge, my office has a separate circuit for one wall, vs the rest of the room vs the lights. All my lights are separate from the outlets in a room and all rooms are on their own. 20 amp outlets in the garage for tools. Anything pops it doesn't take out half the house.

[–] [email protected] 1 points 9 months ago

This 100%, also get some good outdoor outlets in a convenient location for robot mowers.