Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

[email protected]

Angle valve automation (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

5 comments fedilink hide all child comments

I am wondering if there anything can automate opening and shutting down water through angle valve?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 11 months ago (2 children)

Previously I've achieved similar using an RC Servo with a fabricated bracket.

The reason I didn't use a typical motorised valve is I wanted proportional control of the flow, not just on/off.

If this is a Radiator Valve, there are plenty of off the shelf solutions, replacing the whole valve. Some of them will talk to home automation systems.

[–] [email protected] 1 points 11 months ago (1 children)

Thanks for sharing! Proportional flow control is ideal! It will be great to share some links of the tools/parts that would help me to start this project

[–] [email protected] 1 points 11 months ago

I did it by measuring the torque required to turn the valve (using a spring balance on the end of a lever which operated the valve.

Then bought a servo which had about double that torque rating - just so it has some in the bag if needed & won't be over-stressed long term.

I fabricated a bracket for mine - but this could more easily be 3D Printed.

Then used an ESP32 (Arduino kind of thing) to control the servo.

Unfortunately, I have no links or guides for you to follow - you'll have to figure it out as you go.