this post was submitted on 24 Nov 2023
0 points (50.0% liked)
Homelab
371 readers
9 users here now
Rules
- Be Civil.
- Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
- No memes or potato images.
- We love detailed homelab builds, especially network diagrams!
- Report any posts that you feel should be brought to our attention.
- Please no shitposting or blogspam.
- No Referral Linking.
- Keep piracy discussion off of this community
founded 11 months ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Is your UPS a stepped sine wave or a true sine wave?
Does the alarm go away if you completely unplug the other PSU? Does the server keep running if you do or does it shut down?
Simulated sine wave. The weird thing is my 2 other supermicro servers on those UPS don't have that issue, it's just this one.
The alarm is normal, if you unplug 1 PSU it warns that something is wrong. But it shouldn't do that on UPS battery. Server keeps running because other PSU supplies power to server.
Some systems don’t like simulated sine waves.
You need to test what happens if you unplug the second PSU because it’s possible the first is shutting down on what it considers an invalid input. You might not actually have any redundancy.
Both PSU do the same though. It's not specifically one of them. Whichever ups I put on battery, the PSU will act like it's not getting power.
I get that it happens with both. What I’m telling you to do is to put one on battery and completely kill the power to the other.
If the PSUs are alerting because they don’t like your budget UPS but they still work then fine, that’s annoying. If they’re shutting down because they REALLY don’t like it then the UPSs aren’t doing anything aside from making your setup less efficient and you don’t actually have any backup during a power loss.
Yeah it kills the server. The one on battery doesn't sustain anything. The UPS is not giving any backup power for black/brown outs for that particular server regardless now.
Is this really just PSU? Or it's tied into the MB somehow?
Assuming this isn’t user error, where you have your Server plugged into outlets that are only surge protected and not battery powered, you have it backwards. Your server, or more specifically the power supplies, power controller, and the BMC (if you have one), aren’t DRAWING any power from your UPS because they don’t consider it clean enough to use. The UPS doesn’t “give” anything.
Check to make sure you’re using ports that are powered under battery and if so your options are to get a new UPS that generates a pure sine wave, get a new server that doesn’t care, or just plug it straight into the wall and know that it will shut down during a power outage.