Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 11 months ago

MODERATORS

[email protected]

Automate my hot water heater (alien.top)

submitted 10 months ago by [email protected] to c/[email protected]

21 comments fedilink hide all child comments

I am typically the first one in my house to take a shower and I like hot showers. I have noticed that if I take a shower first, the hot water is not that hot and doesn't last very long. But if others take showers before me and the hot water has to recharge then the hot water is HOT and lasts a long time.

I have a 50 gallon hot water tank.

The only two things I have (besides sinks and showers) that use hot water are a dumb dishwasher and a dumb washing machine.

What I was thinking was to set up an automation in HA to somehow trigger something to use hot water for like 10 minutes in order to get the hot water heater to recharge.

Any ideas?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 10 months ago (3 children)

Honestly sounds like you need a new hot water heater. It should be keeping the temp through same, whether recently used or not. If shower is far away from hot water heater, a recirculation pump may help.

[–] [email protected] 1 points 10 months ago (2 children)

Cold pipes in the morning is not a water heater problem, that's pretty typical.

A recirculation pump would definitely work and would have the added bonus of immediate warm water at any time, but it's going to use extra energy 24/7 to do so--especially considering it sounds like OPs system already has a lot of passive heat loss along the pipes.

Might not be worth the extra cost if the primary problem is just the morning shower.

[–] [email protected] 1 points 10 months ago

There has been people. I’d read a thread on the home assistant forums a couple years ago. It wouldn’t be too hard, have a couple schedules, presence detection, etc and you’d be good to go

[–] [email protected] 1 points 10 months ago

Most times you don't even need a pump if there's enough elevation change. A cleverly placed loop pipe should circulate the water by gravity. I put a loop in a 4-story house a few years back. But that being said it's constantly using energy to heat up the water.