this post was submitted on 14 Nov 2023
1 points (100.0% liked)
Home Automation
79 readers
2 users here now
Home automation is the residential extension of building automation.
It is automation of the home, housework or household activity.
Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.
Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.
Rules
- No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
- Referral/affiliate links are NOT ALLOWED!
- NO POLITICS! There are plenty of other communities to discuss them; this is not one.
- When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
- Crowdfunding links are not allowed.
- Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I'm slowly replacing my Control4 system with DIY.
The hardest part for me has been finding a good controller that is powerful but doesn't require you to make HA a second full-time job (looking at you Home Assistant).
I'm hoping Samsung will come out with a good Matter controller soon.
As long as you are not doing AV distribution, you can pretty easily replace everything C4 does with DIY hardware.
You can do AV distribution too...lots of ways.
Show me how to control an HDMI matrix and multi-channel amp through Alexa or similar consumer controller.
If you want to DIY AV distribution you probably need Home Assistant, very specific hardware it support and a lot of time to learn how. With Control4 you just plug in the hardware, tell it which channels are wire to which rooms and you are done.
Hi, With myServer, assuming you get hardware that is supported, this is all very well supported. We do video and audio matrices every day for our commercial sports bar / restaurant business.
The description of the control4 experience is close to a myServer experience, but not quite. It's not as easy as that, but the idea is the same. myServer is MUCH more customizable than Control4 so it's a little more involved.
Each device / channels are associated to a room. When you choose that room, then the system assumes you want to watch video in that room. So, the Outputs are made "active" for that room. You then choose a video source (like "Roku"). This then sets the Active video input. Behind the scenes, myServer tells the HDMI matrix to set that Input to that Output. And then you are watching your Roku (in your equipment rack) in your Living Room (the room you selected).
​
With the SmartRemote, you can choose that room, indicate it's YOU (not your significant other) and that you want to watch Roku. The rest is done using the programming like described above. An emulator of this experience is available at https://allonis.com
​
And if this is what you want to implement, your timing is good because we have an active Kickstarter for what you would need at a greatly discounted prices:
https://www.kickstarter.com/projects/1957275162/smartremote-a-customizable-remote-control
Feel free to ask further questions!!!