this post was submitted on 17 Nov 2024
20 points (95.5% liked)

3DPrinting

15716 readers
77 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
 

...after an extended period of PETG, and I have to say I think my favorite part is after the print ends and the bed starts to cool off and the snap/crackle/pop of the piece coming off on it's own. Such a pleasant ASMR experience.

Highly recommend..

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 1 points 3 weeks ago (1 children)

But besides the ASMR is it better than PETG (considering building a fume hood for abs) and what brand.

[–] Ajen 3 points 3 weeks ago (1 children)

IMO there's no "best" material, they all have advantages and disadvantages. PLA is very rigid, PETG is UV and temperature resistant, ABS is temperature resistant and dissolves in acetone... ABS is tricky to print though, even with an enclosure. I wouldn't recommend it unless you need the higher temperature resistance or like to tinker.

[–] [email protected] 1 points 2 weeks ago

I manily use PETG because for me it is way stronger and easier to print than PLA (especially Prusa filament)