this post was submitted on 30 Jul 2024
30 points (94.1% liked)

PC Master Race

15006 readers
8 users here now

A community for PC Master Race.

Rules:

  1. No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
  2. Be respectful. Everyone should feel welcome here.
  3. No NSFW content.
  4. No Ads / Spamming.
  5. Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.

Notes:

founded 2 years ago
MODERATORS
 

My current trackball has lost its smoothness and feels "sticky" no matter how well, or often I clean it.

So, I'm looking for a trackball (thumb controlled) with the following features:

  • Bluetooth wireless with support for at least two connections (for laptop and PC media station).
  • Uses AA or AAA batteries.
  • Uses bearings.
  • Set at a tilt/ergo angle.
  • Repairability is also important, but not a total dealbreaker if the mouse is high-enough quality.

So far, most that I've found will lack one of those features, but I'd really like to have all of them, if possible.

UPDATE: Thanks to everyone who offered tips on getting my current trackball working better. Today, trying to roll the ball left became very difficult, like it didn't want to move. I took it out, looked at the little white ball (bearing?) supports that the ball should be rolling on, and noticed that the left-most one was almost pushed in, and flush with the cup that the ball sits in. The other two are higher up, so the ball can "float" on those, but not this other one. The manufacturer is already sending a replacement mouse, so it should work better, but I'd still like to find my unicorn 😄

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 3 points 4 months ago (10 children)

When you clean it, are you just cleaning the ball? Depending on the type of trackball, there may be some small plastic rollers inside that have gunk built up on them. If you can safely take it apart and clean those well, it can make a world of difference. Back in the days of mechanical mice, this was a pretty common issue.

If your trackball uses some kind of optical sensor(s) and isn't mechanical, my apologies for wasting your time.

[–] [email protected] 2 points 4 months ago (9 children)

It looks like it has a sensor and three white "balls" that the trackball sits on.

I do clean those, and they never have gunk built up on them (maybe I clean them too often?), but I only wipe them clean without using isopropyl alcohol or anything like that. Maybe I should try that?

[–] gruvn 2 points 4 months ago (1 children)

Absolutely use isopropyl alcohol!

[–] [email protected] 2 points 4 months ago (1 children)

Tried with isopropyl alcohol, and it feels worse :( Like rolling a wooden ball on more wood.

Kensington says to use Vaseline to lube the ball. I can only imagine that would gum things up, no?

[–] [email protected] 1 points 4 months ago (1 children)

When reading your post, I started thinking of silicone lubricants. Have you tried anything like that? Ideally, you would only lubricate the parts that come into contact with the ball.

[–] [email protected] 2 points 4 months ago (1 children)

That might be an idea! I'll see if that's safe to do. 👍

[–] [email protected] 1 points 4 months ago

I would try PTFE. Some people report using the grease from your nose / face works well, but that's a bit icky for me. You don't want to use a lubricant that will make the ball too slippery or you won't be able to manipulate it with your fingers. And you don't something thick that will gunk up. PTFE is safe for electronics, very thin, and safe to touch at room temperatures. It gets toxic at a very high temp (like 500F or something). I would put it on a cloth and rub all moving parts with it. Add it in small amounts gradually and see if the scratchy "woody" feeling improves.

load more comments (7 replies)
load more comments (7 replies)